BVDJB - 24 OZ, POLYCEL TRIPLE EXPANDING INSULATING (SUPDAT)
- MSDS: BVDJB
- Manufacturer: MACKLANBURG DUNCAN
- Product Name: 24 OZ, POLYCEL TRIPLE EXPANDING INSULATING (SUPDAT)
- National Stock Number: 5640-00N049755
Product Identification
Product ID:24 OZ, POLYCEL TRIPLE EXPANDING INSULATING (SUPDAT)
MSDS Date:06/09/1992
FSC:5640
NIIN:00N049755
MSDS Number: BVDJB
Responsible Party
OKLAHOMA CITY, OK 73188
US
Emergency Phone: 405-528-4411
Info Phone: 405-528-4411
Cage: 82464
Contractor
Telephone: 800-654-8454 / 405-528-4411
Cage: 82464
Ingredients
ADRENOMIMETICS (I.E. EPINEPHRINE) MAY BE
RTECS: 9999999ZZ
ACUTELY OR CHRONICALLY EXPOSED TO CFC'S .
RTECS: 9999999ZZ
PUNCTURE CAN. EMPTY CAN COMPLETELY BEFORE
RTECS: 9999999ZZ
STORED AT TEMPS <40F, CONTENTS MAY SEPARATE.
RTECS: 9999999ZZ
IT IS VERY DFCLT TO REMOVE. PROD CURES TO RIGID
RTECS: 9999999ZZ
SKIN W/OUT MECH ABRASION. BEFORE FOAM CURES IT MAY
RTECS: 9999999ZZ
IS IMPERATIVE CARE IS TAKEN TO PVNT FOAM CONT
RTECS: 9999999ZZ
PROPER PRECS FOR HNDLG SHOULD BE OBSERVED. DO NOT
RTECS: 9999999ZZ
USE IN GENERAL VICINITY OF ARC WELDING, OPEN FLAMES
RTECS: 9999999ZZ
FORMATION OF CHLORIDES, FLUORIDES & PHOSGENE .
RTECS: 9999999ZZ
PRDCD SENSIT OF MYOCARDIUM TO EPINEPHRINE IN LAB
RTECS: 9999999ZZ
POLYMETHYLENEPOLYPHENYL ISOCYANATE; (POLYMERIC
CAS: 9016-87-9
RTECS: TR0350000
Fraction By Weight: 35%
OSHA PEL 0.005 PPM (MFR)
ACGIH TLV: 0.02 PPM (MFR)
METHANE, CHLORODIFLUORO-; (CHLORODIFLUOROMETHANE).
CAS: 75-45-6
RTECS: PA6390000
Fraction By Weight: <35%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM
ETHANE, 1-CHLORO-1,1-DIFLUORO-; (CHLORODIFLUOROETHANE).
CAS: 75-68-3
RTECS: KH7650000
Fraction By Weight: <35%
OSHA PEL 1000 PPM (MFR)
ACGIH TLV: 1000 PPM (MFR)
>1 (BUTYL ACETATE=1).
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
PHOSPHORIC ACID, TRIS (2-CHLORO-1-METHYLETHYL) ESTER;
CAS: 13674-84-5
RTECS: TC9000000
Fraction By Weight: 12%
OSHA PEL N/K
ACGIH TLV: N/K
(ORAL,RAT) 1250 MG/KG.
RTECS: 9999999ZZ
OSHA PEL N/K
ACGIH TLV: N/K
CAN BE VIOLENT.
RTECS: 9999999ZZ
VAPS/AEROSOL ARE IRRIT. CORNEAL DMG CAN
RTECS: 9999999ZZ
FOAM CONT CAN CAUSE PHYSICAL DMG AS WELL, DUE TO
RTECS: 9999999ZZ
CAN RSLT IN IRRIT & CORR ACTION IN MOUTH & DIGESTIVE
RTECS: 9999999ZZ
CAUSE OBSTRUCTION OF FREE PASSAGE OF FOOD & AIR. DO
RTECS: 9999999ZZ
CURED PIECES OF FOAM ARE SWALLOWED. CURED FOAM IS
RTECS: 9999999ZZ
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL:VAPS OF POLYCEL MAY CONTAIN
TRACE LEVELS OF FREE ISOCYANATES & PROPELLANT. PERS SENSITIZED TO
ISOCYANATES MAY EXPER BREATHLESSNESS, SEV COUGH, DYSPNEA, CHEST
DISCOMFORT, NOSE & THROAT IRRIT & RE DUCED PULM FUNC. INHAL OF
PROPELLANT ATVERY HIGH CONCS MAY CAUSE LT HEAD, HDCH, GIDD,
SHORTNESS OF (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:BREATH & MAY LEAD TO NARCOS, CARDIAC
IRREGS, UNCON & DEATH. SKIN:MIXT IS ESSNTLY NON-IRRIT. IN SM
POPULATION OF PERS POLYCEL MAY CAUSE LOCALIZED IRRIT &
DISCOLORATION. PRLNG CONT COULD PRDCE REDDENING, SWELL/BLISTERING
& IN SOME INDIVIDUALS, SENSIT & DERM. PROD ADHERES TO SKIN LIKE
ADHESIVE. EYES:LIQ, (ING 8)
Medical Cond Aggravated by Exposure:CHRONIC RESPIRATORY PROBLEMS.
First Aid
First Aid:INHAL:TREAT SYMPTOMATICALLY W/VASO-DILATORS & OXYGEN.
SKIN:REMOVE CONTAM CLTHG. WASH IMMED W/ABRASIVE SOAP,
ACETONE/ALCOHOL MAY ALSO BE HELPFUL. AFTER PROD CURES IT CAN ONLY
BE REMOVED MECHANICALLY. M FR RECS USING ABRASIVE CLEANER & STIFF
VEGETABLE BRUSH. EYES:IMMED FLUSH W/WATER FOR AT LST 15 MINS,
HOLDING EYELIDS APART. CONSULT MD IMMED. INGEST:DO NOT INDUCE
VOMIT, CONTACT MD.
Fire Fighting
Extinguishing Media:CARBON DIOXIDE, FOAM, DRY CHEMICAL, HIGH EXPANSION
CHEMICAL FOAM.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED PRESSURE DEMAND SCBA &
FULL PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:THERMAL DECOMP PRODS MAY INCL FLUORIDES,
CHLORIDES & PHOSGENE. IRRIT/TOX GASES & AEROSOLS SUCH AS CARBON
MONOXIDE, CARBON DIOXIDE, NITROUS OXIDES,(SUPDAT)
Accidental Release
Spill Release Procedures:WEAR IMPERVIOUS GLOVES, SAFETY GLASSES &
APPROPRIATE WORK CLOTHES. COVER W/ABSORBENT MATERIAL (SAWDUST);
PLACE IN OPEN TOP CONTAINER OR PLASTIC SHEET. AFTER CURING,
MATERIAL CAN ONLY BE REMOVED MECHAN ICALLY.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE NEAR HEAT SOURCES,
SPKS/FLAME. STORE BTWN 40 & 120F. KEEP OUT OF REACH OF CHILDREN.
READ & UNDERSTAND ALL INSTRUCTIONS BEFORE USE.
Other Precautions:DO NOT FREEZE. DO NOT INGEST. DO NOT STORE IN CARS,
CAR TRUNKS, OUTSIDE IN DIRECT SUNLIGHT ON HOT DAYS/IN ANY LOCATION
WHERE TEMP MAY EXCEED 120F. CONTENTS UNDER PRESS. HEAT MAY CAUSE
UNCONTROLLED REL S OF MATL/EXPLO. IF CAN IS (ING 17)
Exposure Controls
Respiratory Protection:NIOSH/MSHA APPROVED CARTRIDGE RESPIRATOR IS
RECOMMENDED.
Ventilation:ADEQUATE TO MAINTAIN BELOW TLV, MECHANIAL EXHAUST IS
RECOMMENDED. USE ONLY IN WELL VENTILATED AREAS.
Protective Gloves:CHEMICALLY RESIST RUBBER/PLASTIC GLOVES.
Eye Protection:ANSI APPROVD SFTY GOGGS & FCSHLD .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:WASH SKIN & HANDS AFTER USE.
Supplemental Safety and Health
MFR'S TRADE NAME/PART NO:FOAM SEALANT. EXPLO HAZ:ISOCYANURATES &
HYDROGEN CYANIDE MAY BE PRDCD DURING BURNING. SEALED CNTNRS CONTAIN
FREON WHICH MAY EXPAND UNDER PRESS & EXPLODE. MDI VAPS, FLUOROCARBO
N VAPS & OTHER DECOMP PRODS THAT ARE HIGHLY TOX CAN BE GENERATED.
COOL FIRE EXPOS CNTNRS W/COLD WATER.
Chemical Properties
Boiling Pt:B.P. Text:SEE INGS
Vapor Pres:SEE INGS
Vapor Density:SEE INGS
Spec Gravity:1.08 (H*2O=1)
Evaporation Rate & Reference:SEE INGREDIENTS
Solubility in Water:INSOLUBLE
Appearance and Odor:BLUE-GREEN VISCOUS FOAM W/SLIGHT SWEET ODOR. SOLID
UPON CURING.
Percent Volatiles by Volume:33
Stability
Stability Indicator/Materials to Avoid:YES
WATER, STRONG CAUSTICS, AMINES, SOME METAL COMPOUNDS, ALCOHOLS,
Stability Condition to Avoid:WATER CONTAM, FREEZING, HEAT, TEMPS >120F.
CAN REACT W/WATER PRDCG CARBON DIOXIDE. AT ELEVATED TEMPS THIS RXN
(ING 7)
Hazardous Decomposition Products:CHLORIDES, FLUORIDES & PHOSGENE.
CARBON DIOXIDE, CARBON MONOXIDE, NITROUS OXIDES, HYDROGEN CYANIDE,
ISOCYANURATES.
Disposal
Waste Disposal Methods:USE ENTIRE CAN OF FOAM W/IN 30 DAYS OF INTIAL
APPLICATION. IF EXCESS PROD NEEDS TO BE DISPOSED OF, VENT CAN &
DISPENSE FOAM INTO SUITABLE WASTE CNTNR, ALLOW TO CURE & DISP OF IN
SANIT LANDFILL I/A/W L OC, STATE & FED REGS. DO NOT INCINERATE/
(ING 16)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.